50 Round bar

Round bar (solid) to Circle geometry - no table needed.

Diameter

50 mm

Mass

15.41 kg/m

Surface area

0.157 m2/m

Cross-sectional area

1963 mm2

• Cut to length with square ends. Give us the cut length, not the span - a span leaves out the bearings.
• Red oxide primer if you want it, priced off the surface area above.
• Grade as your engineer specified, S275 or S355. Mill certificates to BS EN 10204 3.1 on request.
• The mass above is the published table value, which is what suppliers settle tonnage on and what we price from.