Disclaimer: section sizes are supplied by the customer or their structural engineer. This system makes no structural safety judgement - it does not check load capacity, suggest substitute sections or assess deflection. The supplier accepts no responsibility for structural suitability.
Section data: BS EN 10365:2017 and BS EN 10210 / 10219, taken from the SCI P363 Blue Book data published by the Steel Construction Institute. Mass per metre is the published table value, never the nominal size in the product name - they differ (a 305x102x33 weighs 32.8 kg/m).
1 - Choose a section
All families, grouped. Type a size, a designation or a family word - for example 457, 203x133, RHS 100x50, 33 (kg/m) or angle.
Nothing matches that. Try a size such as 203x133, a mass such as 33, or a family word such as PFC or angle.
No matches.
Not listed? These three have no table to fall off - the mass and surface area are derived from the geometry exactly, so any size works.
x
Flat bar and plate are cut to any size - the mass is exact rectangle geometry.
2 - Configure
Pick a section above.
3 - Basket (0 line(s) / 0 kg)
No items yet. Pick a section, set a length and add it.
Postcode sets the delivery zone (CR / SM are local)